Configuration Cisco 7960

Build your own

Original Template found at

http://www.voip-info.org/wiki/view/cisco+mass+deployment

If you are using a NAT proxy please make sure to forward UDP ports 5060/5060 and 16384/32768Β (Start port/End Port) to your internal IP number for your phone you might want to setup a static IP or have your router assign one for the Phone.Β Along with other config files mentioned at " http://www.voip-info.org/wiki/view/cisco+mass+deployment" include these two files in your tftp directory for your phone, "SIPDefault.cnf" and "SIPXXXXXXXXX.cnf" XX represent your device's Mac Address.Β I am also attaching some of the configuration files

FILENAME: SIPDefault.cnf
CONTENTS:
# Image Version
image_version: "P0S3-08-3-00" # Input your specific Firmware version here

# Proxy Server
proxy1_address: " 213.175.221.14" # IP address here alternatively

# Proxy Server Port (default - 5060)
proxy1_port:"5060"

# Emergency Proxy info
proxy_emergency: "" # IP address here alternatively
proxy_emergency_port: "5060"

# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5060"

# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"

# NAT/Firewall Traversal
nat_enable: "1"
nat_address: "XX.XXX.XXX.XX" # Your external IP adress
voip_control_port: "5060"
start_media_port: "16384"
end_media_port: "32768"
nat_received_processing: "0"

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: "1"

# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: "3600"

# Codec for media stream (g711ulaw (default), g711alaw, g729)
preferred_codec: "none"

# Enable VAD (0-disable (default), 1-enable)
enable_vad: "0"

# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)

# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default)

# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: "1"

# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: "avt" ~np~# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: "3"

# SIP Timers
timer_t1: "500" ; Default 500 msec
timer_t2: "4000" ; Default 4 sec
sip_retx: "10" ; Default 11
sip_invite_retx: "6" ; Default 7
timer_invite_expires: "180" ; Default 180 sec

# Setting for Message speeddial to UOne box
messages_uri: "*97"

# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "./"

# Time Server
sntp_mode: "unicast"
sntp_server: "sip.callwithus.com" # IP address here alternatively
time_zone: " EST" # Set to your timezone
dst_offset: "1"
dst_start_month: "April"
dst_start_day: ""
dst_start_day_of_week: "Sun"
dst_start_week_of_month: "1"
dst_start_time: "02"
dst_stop_month: "Oct"
dst_stop_day: ""
dst_stop_day_of_week: "Sunday"
dst_stop_week_of_month: "8"
dst_stop_time: "2"
dst_auto_adjust: "1"

# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: "0" ; Default 0 (Do Not Disturb feature is off)

# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous)

# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls)

# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)
call_waiting: "1" ; Default 1 (Call Waiting enabled)

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: "101" ; Default 100

# XML file that specifies the dialplan desired
dial_template: "dialplan"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"

#Autocompletion During Dial (0-off, 1-on [default])
autocomplete: "1"

#Time Format (0-12hr, 1-24hr [default])
time_format_24hr: "0"

# URL for branding logo
logo_url: " http://pbx.mycompany.com/cisco/logo.bmp"

# Remote Party ID
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled

FILENAME: SIPXXXXXXXXX.cnf Where the XXs are the MAC address of your Cisco 7960
CONTENTS:
# SIP Configuration Generic File

# Image Version
image_version: P0S3-08-3-00
phone_label: " "

# Line 1 appearance
line1_displayname: "username"
line1_shortname:"CW"
line1_name: username
line1_authname: "username"
line1_password: "password"

# Line 2 appearance
line2_displayname: ""
line2_shortname: ""
line2_name: UNPROVISIONED
line2_authname: "UNPROVISIONED"
line2_password: "UNPROVISIONED"

# Line 3 appearance
line3_displayname: ""
line3_shortname: ""
line3_name: UNPROVISIONED
line3_authname: "UNPROVISIONED"
line3_password: "UNPROVISIONED"

# Line 4 appearance
line4_displayname: ""
line4_shortname: ""
line4_name: UNPROVISIONED
line4_authname: "UNPROVISIONED"
line4_password: "UNPROVISIONED"

# Line 5 appearance
line5_displayname: ""
line5_shortname: ""
line5_name: UNPROVISIONED
line5_authname: "UNPROVISIONED"
line5_password: "UNPROVISIONED"

# Line 6 appearance
line6_displayname: ""
line6_shortname: ""
line6_name: UNPROVISIONED
line6_authname: "UNPROVISIONED"
line6_password: "UNPROVISIONED"

# Phone Prompt (The prompt that will be displayed on console and telnet)
phone_prompt: "SIP Phone" ; Limited to 15 characters (Default - SIP Phone)

# Phone Password (Password to be used for console or telnet login)
phone_password: "cisco" ; Limited to 31 characters (Default - cisco)

# User classifcation used when Registering [ none(default), phone, ip ]
user_info: none

dialplan.xml:

<DIALTEMPLATE>
<TEMPLATE MATCH="*" Timeout="5"/> 
</DIALTEMPLATE>

XMLDefault.cnf.xml:

<Default>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<mgcpPorts>
<listen>2427</listen>
<keepAlive>2428</keepAlive>
</mgcpPorts>
</ports>
<processNodeName></processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
<loadInformation8 model="IP Phone 7940">P003-07-4-00</loadInformation8>
<loadInformation7 model="IP Phone 7960">P003-08-3-00</loadInformation7>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<servicesURL></servicesURL>
</Default>